Skip to content

Use standard load balancer names#

Operational Excellence · Load Balancer · Rule · 2025_06 · Awareness

Load balancer names should use a standard prefix.

Description#

An effective naming convention allows operators to quickly identify resources, related systems, and their purpose. Identifying resources easily is important to improve operational efficiency, reduce the time to respond to incidents, and minimize the risk of human error.

Some of the benefits of using standardized tagging and naming conventions are:

  • They provide consistency and clarity for resource identification and discovery across the Azure Portal, CLIs, and APIs.
  • They enable filtering and grouping of resources for billing, monitoring, security, and compliance purposes.
  • They support resource lifecycle management, such as provisioning, decommissioning, backup, and recovery.

For example, if you come upon a security incident, it's critical to quickly identify affected systems, the functions that those systems support, and the potential business impact.

For load balancers, the Cloud Adoption Framework (CAF) recommends using the lbi-, and lbe- prefix. Use of different prefixes depends on the intended usage of the load balancer.

Requirements for load balancers names:

  • At least 1 character, but no more than 80.
  • Can include alphanumeric, underscore, hyphen, period characters.
  • Can only start with a letter or number, and end with a letter, number or underscore.
  • Load balancer names must be unique within a resource group.

Recommendation#

Consider creating load balancers with a standard name. Additionally consider using Azure Policy to only permit creation using a standard naming convention.

Examples#

Configure with Bicep#

To deploy load balancers that pass this rule:

  • Set the name property to a string that matches the naming requirements.
  • Optionally, consider constraining name parameters with minLength and maxLength attributes.

For example:

Azure Bicep snippet
@minLength(1)
@maxLength(80)
@description('The name of the resource.')
param name string

@description('The location resources will be deployed.')
param location string = resourceGroup().location

resource internal_lb 'Microsoft.Network/loadBalancers@2024-05-01' = {
  name: name
  location: location
  sku: {
    name: 'Standard'
    tier: 'Regional'
  }
  properties: {
    frontendIPConfigurations: [
      {
        name: 'frontendIPConfig'
        properties: {
          privateIPAllocationMethod: 'Dynamic'
          subnet: {
            id: subnetId
          }
        }
        zones: [
          '1'
          '2'
          '3'
        ]
      }
    ]
  }
}

Configure with Azure Verified Modules

A pre-validated module supported by Microsoft is available from the Azure Bicep public registry. To reference the module, please use the following syntax:

br/public:avm/res/network/load-balancer:<version>

To use the latest version:

br/public:avm/res/network/load-balancer:0.4.2

Configure with Azure template#

To deploy load balancers that pass this rule:

  • Set the name property to a string that matches the naming requirements.
  • Optionally, consider constraining name parameters with minLength and maxLength attributes.

For example:

Azure Template snippet
{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentTemplate.json#",
  "contentVersion": "1.0.0.0",
  "metadata": {
    "_generator": {
      "name": "bicep",
      "version": "0.34.44.8038",
      "templateHash": "15799925094518670850"
    }
  },
  "parameters": {
    "name": {
      "type": "string",
      "minLength": 1,
      "maxLength": 80,
      "metadata": {
        "description": "The name of the resource."
      }
    },
    "location": {
      "type": "string",
      "defaultValue": "[resourceGroup().location]",
      "metadata": {
        "description": "The location resources will be deployed."
      }
    },
    "subnetId": {
      "type": "string",
      "metadata": {
        "description": "The resource ID of the virtual network subnet."
      }
    },
    "pipId": {
      "type": "string",
      "metadata": {
        "description": "The resource ID of the public IP address."
      }
    }
  },
  "resources": [
    {
      "type": "Microsoft.Network/loadBalancers",
      "apiVersion": "2024-05-01",
      "name": "[parameters('name')]",
      "location": "[parameters('location')]",
      "sku": {
        "name": "Standard",
        "tier": "Regional"
      },
      "properties": {
        "frontendIPConfigurations": [
          {
            "name": "frontendIPConfig",
            "properties": {
              "privateIPAllocationMethod": "Dynamic",
              "subnet": {
                "id": "[parameters('subnetId')]"
              }
            },
            "zones": [
              "1",
              "2",
              "3"
            ]
          }
        ]
      }
    }
  ]
}

Notes#

This rule does not check if load balancer names are unique. Additionally, the following naming conventions that are related to managed resources are ignored:

  • kubernetes*

Rule configuration#

AZURE_LOAD_BALANCER_NAME_FORMAT

To configure this rule set the AZURE_LOAD_BALANCER_NAME_FORMAT configuration value to a regular expression that matches the required format.

For example:

configuration:
  AZURE_LOAD_BALANCER_NAME_FORMAT: '^(lbi|lbe)-'

Comments